玻璃幕墻、石材幕墻、金屬板幕墻、人造板材幕墻、構件式幕墻、單元式幕墻、點支承玻璃幕墻、全玻幕墻、雙層幕墻等小型、中大型和超大型平面幕墻、陰、陽轉角的異型幕墻、弧形幕墻以及各種類型結構幕墻。

建筑幕墻氣密性能、水密性能、抗風壓性能、平面內變形性能、保溫性能、耐撞擊性能、結構安全性能、熱循環性能等物理性能。

檢測方法標準

中國標準

GB/T 21086-2007《建筑幕墻》

GB/T 15227-2007《建筑幕墻氣密、水密、抗風壓性能檢測方法》

GB/T 18250-2015《建筑幕墻平面內變形性能檢測方法》

美國標準

ASTM E283-04(Reapproved 2012) Standard Test method for determining rate of air leakage through exterior windows, curtain walls, and doors under specified pressure differences across the specimen《在規定壓力差下對外窗、幕墻和門樣品的空氣滲漏量的標準檢測方法》

ASTM E331-00(Reapproved 2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference《在均勻靜壓差下的外窗、門、采光頂和幕墻水密性能的標準檢測方法》

ASTM E547-00(Reapproved 2016) Standard test method for water penetration of exterior windows, skylights, doors, and curtain walls by cyclic static air pressure difference《在循環靜壓差下的外窗、門、采光頂和幕墻水密性能的標準檢測方法》

ASTM E330/E330M-14 Standard test method for structural performance of exterior windows, doors, skylights and curtain walls by uniform static air pressure difference《在均勻靜壓差下的外窗、門、采光頂和幕墻結構性能的標準檢測方法》

ASTM E1233/E1233M-14 Standard test method for structural performance of exterior windows, doors, skylights, and curtain walls by cyclic air pressure differential《在循環壓差下的外窗，門、采光頂和幕墻結構性能的標準檢測方法》

AAMA 501.1-05 Standard test method for water penetration of windows, curtain walls and doors using dynamic pressure《在動態壓力下的窗、幕墻和門的水密性能標準檢測方法》

AAMA 501.4-09 Recommended static test method for evaluating curtain wall and storefront systems subjected to seismic and wind induced inter-story drifts《用于評估幕墻和店面系統承受地震和風引起層間位移的推薦性靜態檢測方法》

AAMA 501.5-07 Test method for thermal cycling of exterior walls《外墻熱循環檢測方法》

AAMA 501.7-11 Recommended static test method for evaluating windows, window wall, curtain wall and storefront systems subjected to vertical inter-story movements《用于評估窗、幕墻和店面系統承受垂直層間位移的推薦性靜態檢測方法》

歐洲標準

BS EN 13830:2003 Curtain walling-product standard《幕墻—產品標準》

BS EN 12152:2002 Curtain walling-Air permeability-performance requirements and classification《幕墻—?dú)饷苄浴阅芤蠹胺旨?jí)》

BS EN 12153:2000 Curtain walling-Air permeability-Test method《幕墻—?dú)饷苄浴獧z測方法》

BS EN 12154:2000 Curtain walling- Watertightness-performance requirements and classification《幕墻—水密性—性能要求和分級》

BS EN 12155:2000 Curtain walling- Watertightness-laboratory test under static pressure《幕墻—水密性—靜態壓力下實驗室檢測》

BS EN 13050:2011 Curtain walling- Watertightness-laboratory test under dynamic condition of air pressure and water spray《幕墻—水密性—在動態氣壓和淋水情況下的實驗室檢測》

BS EN 13116:2001 Curtain walling-Resistance to wind load-Performance requirements《幕墻—抗風壓—性能要求》

BS EN 12179:2000 Curtain walling-Resistance to wind load-Test method《幕墻—抗風壓—檢測方法》

BS EN 14019:2004 Curtain walling-Impact resistance-performance requirements《幕墻—抗沖擊—性能要求》

BS EN 12600:2002 Glass in building-Pendulum test-Impact test method and classification for flat glass《建筑玻璃—單擺測試—平板玻璃的撞擊檢測方法和分級》

BS EN 13049:2003 Windows. soft and heavy body impact. test method, safety requirements and classification《窗—軟重物沖擊—檢測方法、安全要求和分級》

BS EN 356:2000 Glass in building-Security glazing-Testing and classification of resistance against manual attack《建筑玻璃—安全玻璃—抗手動攻擊的檢測和分級》

LPS 1175:ISSUE 7 Requirements and testing procedures for the LPCB approval and listing of intruder resistant building components, strongpoints, security enclosures and free-standing barriers《LPCB認證對于建筑部件、加強點、安全附件和自立屏障防闖入的要求和測試方法》

CWCT Standard for systemised building envelopes《系統化建筑圍護結構標準》

澳大利亞/新西蘭標準

AS/NZS 4284:2008 Testing of building facades《建筑立面檢測》

新加坡標準

SS381：1996 Materials and performance tests for aluminum curtain walls《鋁合金幕墻的材料和性能檢測》

深圳市盛達森檢測設備有限公司作為專業從事建筑工程質檢設備研發、生產、銷售的高新技術企業。我們先后研發成功建筑節能檢測設備、建筑玻璃光學檢測設備、建材燃燒性能試驗設備、工程管材系列檢測設備、電纜開關系列檢測設備、建筑聲學系列檢測儀器、恒溫恒濕系列養護設備等八大系列的產品，其中多種產品填補了國內空白，并獲得國家專利。